HR 30

High efficiency gasfired unit air heater, 30 kW

  • High efficiency
  • Modulating burner and fan
  • Reliable design
  • Relatively low investment
  • 10 years warranty on heat exchanger
HR 30

High efficiency gasfired unit air heater, 30 kW

  • High efficiency
  • Modulating burner and fan
  • Reliable design
  • Relatively low investment
  • 10 years warranty on heat exchanger

Description

The HR 30 is a condensing air heater with an axial fan. The unit has a capacity of 30 kW and an efficiency of approxiamately 106%. The pre-mix burner and the system fan modulate both independently and stepless back to 30%. These both features ensure a constant and equal temperature in the building. 

More options

The HR 30 is suitable for natural gas or propane gas.
It is also possible to mount the unit up to an angle of 45 degrees. Together with the louvres, it is then possible to blow warm air vertically. The compact and attractive design of the heater makes it possible to install it in almost any situation like showrooms , garages or cash-and-carry shops.

 

Features

  • condensing heater 
  • modulating burner- and fan regulation  for more comfort   
  • delta T-control optimizes gas consumption   
  • compact and light 
  • summer ventilation 
  • natural gas version of propane gas
  • tilted model (V): slanting air distribution 
  • suitable for middle large industrial buildings, garages, etc.  
  • control of 1-8 heaters with 1 thermostat 
  • simple maintenance   
  • delivery incl. siphon   

Technical features

Nominal power 29kW
Nominal load lower value 30kW
Efficiency 106%
Air volume 0m³/h - 3000m³/h
Max. throw horizontal 23m
Max. throw vertical 0m
Supply voltage 230V
Nominal current 1.2A
Max. electric power input 250W
Max. sound level (at a distance of 4 metres) 58dB(A)
Material heat exchanger Stainless steel
Closed version Yes
Burner controller high/low No
Burner controller, modulating Yes
Control signal on/off Yes
Control signal 0-10 V No
Fan type Axial
Degree of protection (IP) IP00B
Height 670mm
Width 795mm
Depth 775mm
Weight 75kg
Min. mounting height (horizontal air distribution) 1.7m
Outer pipe diameter combustion air 80mm
Outer pipe diameter condensate 40mm
Seasonal space heating energy efficiency (Ns) 88.7%
Connection, fuel External thread
Nominal diameter fuel 3/4 inch (20)
Gas consumption low-calorific natural gas (G25) 3.6m³/h
Gas consumption propane (G31) 2.4kg/h
Minimum heat output 9.5kW
Gas consumption high-calorific natural gas (G20) 3.2m³/h

Images

Accessories

Controls
Suspension
Other
  • GA8685
    Mounting set on H-beam, only for GA8580 console with HR
    Article number GA8685
    More information
  • GX4001
    Set vertical louvres HR 30-40 + XR 40-60
    Article number GX4001
    More information
  • GX8002
    Condensate pump set for HR
    Article number GX8002
    More information
  • IK5785
    Hose for condensate pump, 30m - ø10mm
    Article number IK5785
    More information
Flue material

Service articles

View our service parts for the HR 30 (and earlier models) in the parts shop.

Parts shop

Winterwarm HR-range

The Winterwarm HR-range combines the efficiency of a gas-fired unit air heater with additional energy savings and comfort.

All Winterwarm HR types