JET 220 S
                                
                    Air heater, 14 kW
- Applicable in high areas with 5 to 15m height
- Sustainable heating solution
- Simple control 0-10V or on/off signal
- Conical nozzles with induction of air
- Energy saving heating solution
Description
                                                The Winterwarm JET 220S is an air heater with a capacity of 14 kW at a water temperature of 35°C/30°C. Higher water temperatures (f.i. with district heating) provide a higher heat output.
Attention: when the temperature of the discharged air gets higher, the throw is reduced!
The adjustable nozzles have an inducing air discharge pattern with a large coverage of the area and an optimal warmth distribution. For this reason no extra distribution fans are required anymore.
                                            
                                            Features
- Applicable in high areas with 5 to 15m height
- Heating with low water temperatures
- No extra recirculation fans needed
- Conical nozzles with induction of air
- Control by means of a 0-10V speed controller of any other on/off signal
- Stepples control of air volume between 40% and 100%
- Reduces heat loss through the roof
Technical features
| Material heat exchanger | Aluminium/copper | 
|---|---|
| Heat emission | 0kW - 14kW | 
| Fan type | Axial | 
| Suitable for wall mounting | No | 
| Suitable for in-roof mounting | Yes | 
| Suitable for floor mounting | No | 
| With suspension | No | 
| Air volume | 0m³/h - 4200m³/h | 
| Max. throw horizontal | 0m | 
| Max. throw vertical | 12m | 
| dT heating air | 15K - 30K | 
| Connection voltage | 230V - 230V | 
| Number of phases | 1 | 
| Nominal current | 4.2A | 
| Max. electric power input | 840W | 
| Sound pressure level at height of 5 metres | 53dB(A) - 69dB(A) | 
| Adjustable induction in exhaust air | No | 
| Adjustable fins on exhaust side | Yes | 
| Height | 720mm | 
| Width | 730mm | 
| Depth | 695mm | 
| Free-exhausting | Yes | 
| Connection | External thread conical BSPT-R (ISO 7-1 / EN 10226-1) | 
| Nominal diameter | 1 inch (25) | 
| Water-side resistance at dT 20 °C | 11kPa | 
| Max. operating pressure | 500kPa | 
| Water content | 3.9l | 
| Weight including filling | 58kg | 
Downloads
Accessories
Controls
                                                    
                                                        
                                                        
                                                    
                                                Service parts
View our service parts for the JET 220 S (and earlier models) in the parts shop.
Parts shopWinterwarm JET S-series
The Winterwarm JET-S is sustainable air heating for high areas
All Winterwarm WWH_JET_S types 
                 
                         
                                                        
