DXC-series 38 Winterwarm DXC-series The DXC is an indirect fired gasheater with a closed combustion circuit especially developed for application in poultry houses. Consequence is that all CO2 remains outside the house. Therefore, considerably less heating capacity is necessary to maintain the necessary room temperature, thus energy costs can be reduced considerably. Characteristics • SS-steel casing • robust stainless steel tubular heatexchanger • closed combustion system • flexible flue material • no CO2 in the house = less ventilation needed = lower energy consumption = lower costs • energy savings up to 25% possible • reliable technology • CE-approved • easy to service • standard on/off • optional: 0-10V input • optional: reduced heatput • optional: high/low burnercontrol • easy to clean (IPX4D) Interface board for modulating burner control • 0 - 10 V. analogue input (reacts between 2-10 V) • Entrance burner on/off • Entrance ventilation on/off • Reset function • Output failure signal • Output “in operation” signal 2 1 B A 1125 Flue outlet C Air inlet C Gas 3/4" Manual control B 1080 A 2100 1125 Power / Thermostat Flue outlet C Flue outlet Air inlet C Air inlet Gas 3/4" Gas 3/4" Manual control B 1080 A 2100 1125 Flue outlet C Air inlet C Air inlet Gas 3/4" Gas 3/4" Manual control B 1080 Power / Thermostat Flue outlet C Flue outlet Air inlet C Air inlet Gas 3/4" Gas 3/4" Manual control Type A B C DXC60/80 575 650 130 DXC100 740 815 130 Measurements side view top view front side back side 3
RkJQdWJsaXNoZXIy MTE2OTgy